Some Specifications For The Use Of Granary Equipment

We must remember some specifications for the use of granary equipment. Today, let's take a look at the specifications of grazing machines.
1 The operator must first check if the line is broken and broken and the power line plug is firm before using the grain machine.
2 Prior to each operation, the professional will start the operation of the grain mill after 5 minutes of no-load operation, and then proceed with the operation. It is forbidden for the operator to start the grain mill operation by himself.
3Before starting the machine, the operator should put the grain hopper into the outside of the grain pile. After the normal operation, push the grain hopper into the grain pile for operation.
4 Workers should clean up the dust on the thread and drive wheels on the roller at least once in each shift.
5 If there is a deviation phenomenon in the grain machine, the operator should immediately seek professional adjustments, and it is forbidden to run away from the grain machine.
6 Workers are not allowed to overload the grain mill when carrying out grain harvesting operations.
7 When operators use the grain mill to operate normally, if there is a phenomenon of boring cars, the operator should immediately turn off the electrical switch and remove the grain mill from the grain pile to clean up.
8 Regularly check that the main parts are worn and repaired or replaced in time.
9 Avoid sun and rain to ensure its service life